Hanse
Hanse 311
The Hanse 311 is one of Northern Europe's most recognisable production sailboats. Designed by Judel & Vrolijk for Hanse Yachts and built from 2000 to 2006 at Greifswald, roughly 450 hulls left the yard — a refined evolution of the Hanse 301 with updated interior ergonomics and the same self-tacking philosophy. With 9 m LOA, 2.88 m beam, and about 4,680 kg displacement, the model suits couples and small crews cruising the Baltic, Skagerrak, and North Sea. The Hanse 311 keeps the yard's shorthanded deck concept while improving galley stowage and berth access — changes that matter on week-long archipelago cruises more than LOA alone suggests. Buyers cross-shop Hanse 301, Beneteau Oceanis 311, and Dehler 29 listings when they want German production quality in a sub-30-foot berth class with strong resale on Baltic brokerage sites. Nordic buyers should compare asking price against documented rigging, saildrive service, and keel work — cosmetic refreshes rarely replace deferred structural maintenance. Expect 62,000–172,000 kr annual baseline in Swedish marinas with realistic technical reserves. FairHelm tracks Hanse 311 listings because these hulls trade constantly on Blocket, Scanboat, and German brokerage sites. Buyers are rarely choosing between "good" and "bad" boats — they are choosing between documented maintenance and deferred work. A refreshed saloon or new plotter does not cancel unknown rigging age, saildrive seal neglect, or moisture at chainplates. That is why survey discipline matters more here than brand romance. For Nordic ownership, Hanse 311 works as a coastal weekender with occasional longer passages when equipped for cold-water sailing: reliable heating, solid ground tackle, and a realistic technical reserve beyond berth and insurance. Compare adjacent models in FairHelm's [model guides](/en/yachts/models/) and read survey notes before committing a deposit. The cheapest asking price on Blocket is rarely the cheapest boat to own over three seasons. When you shortlist a Hanse 311, build a simple survey scorecard: hull moisture, rigging age, saildrive service, and chainplate integrity. Owner forums and yard quotes from Stockholm, Gothenburg, and Helsingør help you separate cosmetic refresh from structural deferral — especially on boats marketed as "ready to sail" without invoices.
At a glance
Quick facts
- Production
- 2000–2006
- LOA
- 9 m
- Beam
- 2.88 m
- Model
- Hanse 311
Technical data
- Length overall (LOA)
- 9 m
- Beam
- 2.88 m
- Production years
- 2000–2006
Typical problems
- What standing rigging fatigue issues appear on Hanse 311?
- Unknown rigging age is common on Hanse 311; budget replacement if invoices are missing.
- What chainplate leak issues appear on Hanse 311?
- Chainplate bedding failures often show as ceiling stains — moisture mapping before purchase.
- What deck core moisture issues appear on Hanse 311?
- Stanchion bases and tracks concentrate water ingress without periodic rebedding.
- What saildrive seal service issues appear on Hanse 311?
- Saildrive diaphragms on early-2000s installs need interval service; neglected seals cause bilge water and corrosion.
- What keel structure inspection issues appear on Hanse 311?
- Keel bolts and grounding history need professional survey on older imports.
Design History
Hanse introduced the 311 in 2000 as the logical successor to the 301 — same Judel & Vrolijk hull platform and self-tacking jib concept, but with revised interior volume, improved galley ergonomics, and updated deck hardware for owner crews sailing the Baltic and North Sea. Production ran from 2000 to 2006 at Hanse Yachts in Greifswald; owner-registry and brokerage sources cite approximately 450 completed hulls.
Hanse positioned the 311 for coastal and short offshore use in the same market slot as the 301, which explains why buyers often cross-shop both models on German and Scandinavian brokerage sites. Later 311 hulls typically show cleaner factory electrical routing and more consistent saildrive installations than early 301 examples.
Mid-production changes were mostly interior trim, engine options, and equipment packages rather than fundamental hull revisions. That means survey condition, winter storage history, and rigging invoices usually matter more than the model year printed on the brochure. When you evaluate a Hanse 311 on Blocket, treat the maintenance story as part of the specification — not a footnote after the asking price.
Annual Ownership Costs
| Cost item | Low (SEK) | High (SEK) | Notes |
|---|---|---|---|
| Marina berth | 18,000 | 38,000 | 9 m class, Stockholm/Gothenburg |
| Insurance | 8,000 | 22,000 | Agreed value and cruising area |
| Haul-out + winter | 12,000 | 28,000 | Yard package varies by region |
| Antifouling + hull care | 6,000 | 16,000 | Materials and labour |
| Engine / drivetrain | 5,000 | 16,000 | Saildrive seal intervals |
| Rigging reserve | 7,000 | 20,000 | Standing rigging age |
| Deck / structural reserve | 6,000 | 22,000 | Bedding, moisture follow-up |
| Total annual | 62,000 | 172,000 | Excludes major refit years |
Annual ownership for Hanse 311 is predictable when service records are complete. Berth, storage, and insurance dominate fixed costs in Sweden. The largest variables are rigging replacement timing and any survey-led deck or saildrive work triggered after purchase. Keep a separate technical reserve so routine season costs stay stable — especially on Blocket boats marketed as "ready to sail" without invoices.
Pre-Purchase Survey Checklist
Pre-Purchase Inspection Checklist: Hanse 311
Hull, Keel and Underwater Body
- Moisture-map the underwater hull; document osmosis or barrier-coat history on Hanse 311 GRP of this era.
- Inspect keel-to-hull joint, keel bolts, and backing structure for movement or recurring fairing cracks.
- Check rudder bearings and steering linkage under load during sea trial.
Deck and Hardware
- Test bedding at stanchions, tracks, and winches; open nearby interior access if damp stains appear.
- Inspect hatches and portlights for seal compression and core moisture at corners.
- Verify chainplate areas internally for rust staining or soft laminate.
Rig and Sail Systems
- Confirm standing rigging age with invoices; treat unknown age as near-term replacement.
- Inspect self-tacking jib track, furler, and mast step for wear and alignment.
- Operate reefing systems under realistic load.
Machinery and Systems
- Review engine and saildrive service including cooling, exhaust elbow, diaphragm seals, and mounts.
- Audit batteries, charging, and owner-added electrical work for safe fusing.
- Check tanks, bilges, and hoses for age-related seepage.